I was so impressed with the work Perry did on his ducted fan that I
added
his web site to the ACRE News Letter list of web sites.
I also added http://www89.pair.com/techinfo/MassFlow/ductbook.htm
Which is an excellent over view of ducted fans and their applications.
Perry had this link on his web site.
I would like to say we must however keep our eye on the dominate
flight regime and that is cruise efficiency. The product of
Speed X MPG for short.
IMHO the primary use of the rotary powered airplanes
most people are building is economical cross country travel, I think.
This is defined as the ability to fly anywhere we like at low cost
and at high speed. Speed is very important in the equation as we are
competing with the high speed inter-state highway system.
If you can't cruise at 150 MPH at least, you might as well drive
as you will have a car to get around in when you get there. (I just
completed a driving trip to LA-Phoenix and back and the average
car cruise speed was close to 80 MPH.)
200 MPH or 250 cruise in your airplane is even better of course.
I await Perry's flight test data to see how well his ducted fan design
achieved this particular goal..
There are people that just want fo fly and try new things. That too is
fine and I say; "more power to them".
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org