This chart is from the Kuchemann & Weber Aerodynamics of
Propulsion classic book mentioned in
http://www89.pair.com/techinfo/MassFlow/ductbook.htm
The chart is found on page 138. The chart shows the
increase in thrust that can be obtained by increasing
the nose radius of the duct.
Roughly speaking a 50% improvement in static
thrust can be obtained with
a radius that is roughly 14% of the duct diameter.
For a 40 inch id diameter duct the radius would be
5.6 inches. This would give an overall duct diameter
of 51.2 inches. The question is what would be the high
speed drag of such a duct?
You might just make out better with a so-called
Q tip prop. That is a prop that has end plates
or tip sails. Sometimes called Hoerner tips on wings.
Same principle. Trouble is they too are traveling at
near supersonic speed.
Free lunches are hard to find.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org