There is one other thing that I want to mention about ducted
fans. If the static and low speed thrust is enhanced by a large fixed
lip radius such as shown on Perry's web site;
http://www.mickaircraft.com/duckt.htm
Then the duct acts as converging duct speeding up the
airflow through the fan blades at higher forward speeds.
This starts to happen right away as the airplane starts
to move forward. This reduces the maximu PRM of the engine
as the tips of the fan blades goes supersonic sooner.
That is the reason all turbofans having diveraging ducts.
You could run the engine faster and get more HP out of it
with an open prop of the same diameter.
One of the advantage of the inflatable lip is this is
no longer a problem. You can use a diverging or difuser type
duct for high-speed/high-RPM efficiency and still enhance
the static and low speed thrust.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org