Subject: KISS the PSRU goodbye with a ducted fan?
From: Paul
Date: 5/24/1999, 7:36 PM
To: zz

Perry Mick wrote:

Jeff Spitzer wrote:


There is a very important reason for this.  It's called drag divergence
mach no.  When the local velocities on your airfoil go supersonic the drag
will increase rapidly.  This will consume massive amounts of torque for no
add'l thrust.  You WILL find that you can't get to 7000 RPM if you are
approaching mach 1 with your tips not because of pitch but because of drag
divergent tips.  The turbofan guys have spent billions developing computer
codes to design proper blade/duct systems that allow them to run high tip
speeds.  Previous experience without these codes was the reason for Paul's
post about usually keeping the tips subsonic.  Unless you have used one of
these advanced designs you will certainly have efficiency problems at tip
speeds over .8M.  What airfoil are you using...hope it's supercritical.


I certainly don't intend to operate in this region, and don't think it's
necessary when cruising at 200mph.  Also don't intend to operate above
6000 rpm.  My prop is basically just a standard wood prop with
fiberglass
skin, standard clark-y airfoil for easy construction.

It's KISS for me, don't want or need that rocket science.  Besides, if
it turns out to be completely unacceptable, which I doubt, I can always
give up, join the club, and put that Ross redrive on.

Perry

Well let's get with it Perry :-) But please do a little more
acceleration testing
before you try to fly it. I would like to see a plot of acceleration
verses runway distance. An appreciable positive acceleration at flying 
speed means you have excess thrust HP available necessary to climb 
out of ground effect. When an airplane rotates to take off there is 
an  increase in induced drag (drag due to lift). You need excess thrust  
HP over and above that induced drag requirement to climb out of ground
effect. Thrust HP is defined as thrust in pounds times velocity in
FPS divided by 550. It is the HP coming out of the fan and not the
engine HP.
  
Got any long runways to work with?

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org