Perry Mick wrote:
Paul wrote:
Well let's get with it Perry :-) But please do a little more
acceleration testing
before you try to fly it. I would like to see a plot of acceleration
verses runway distance. An appreciable positive acceleration at flying
speed means you have excess thrust HP available necessary to climb
out of ground effect. When an airplane rotates to take off there is
an increase in induced drag (drag due to lift). You need excess thrust
HP over and above that induced drag requirement to climb out of ground
effect. Thrust HP is defined as thrust in pounds times velocity in
FPS divided by 550. It is the HP coming out of the fan and not the
engine HP.
Got any long runways to work with?
I've been doing taxi tests since 7-98, I'm currently getting more brisk
acceleration than ever with the new duct and prop. But I only have
experience with my plane, so wasn't sure how a Lyc LongEz accelerates
down the runway. Tonight a guy who built his Long in '86 and has been
flying it since then (450 hours) taxi tested my plane, he says its ready
to fly.
The long runway here (MMV) is 4 - 22, 5400 feet long, there is also a
threshold on runway 4 of several hundred feet, that I use also. I'm
going to see if I can use my GPS in lat-long mode to put distance
markers at the side of the runway, to get that data.
If your GPS has a NEMA 0183 RS232 interface I have a little program
that records the data every one or two seconds. You need to average
the data for awhile because the DOD randomly screws it up on purpose.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org