Subject: My RX-7 & FEA Models
From: Paul
Date: 5/24/1999, 9:19 PM
To: zz

ingenuir@ix.netcom.com wrote:

Paul,
This is really four-messages-in-one. So, here goes.

I've almost read or discarded all the messages from the newsletter before I asked you
to "hold the mail" so please add me back onto your rotaryeng mail list.

I recently upgraded my finite element analysis package. It would translate AutoCAD
or other 3-D drawings into a NASTRAN model fairly quickly now. Has anyone
provided you with a good drawing of a 12A or 13B or the detail parts for an engine
mount yet? If so, I'd like to get them and set a model up.

Do you recall recommending I buy an RX-7 when you drove the pre-release demo car
in early '78? Thanks again for an excellent suggestion!  Here's the latest on it.

                        May 21, 1999

Steve
Mazda Specialties
1000 Lomita Blvd.
Harbor City, CA 90

Hello,
  I'm delighted with my '79 Mazda RX-7 again!  I just got back from the Lomita
Smog Only inspection station and it passed the smog inspection with flying colors.
Not only that, but your tune-up put the performance edge back in the car.  Who says a
rotary can't be both clean and driveable at 200,400 miles?  This car is great!

  Throughout the 21 years I've enjoyed this car, I've noticed one thing in common
with the days I drove my old Porsche 912.  Almost no Mazda owners or Porsche
owners know many "good" mechanics, the difference is, Mazda owners rarely need
one.  I had so few problems over the years, that I went to Torrance Mazda until they
closed.  I think I've found my "good"  RX mechanic.

        For the record, smog numbers for the 25-mph test were:
Pollutant               HC (%)  CO%             NO (PPM)
Limit                  190      1.21            2394
"Average"               45      0.19            648
My RX-7                 7       0.01            207       PASS!

 Pretty good for an 80,000-mile old engine rebuild with the original thermal
reactor & 4 barrel!

Regards,

Gary Moir

Cc:  Mazda USA
   rotaryeng@earthlink.net

I'll bet you change the oil Garry.

Paul Lamar

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org