F. Marc de Piolenc wrote:
Paul wrote:
Your web site is linked on the ACRE NL web site below Marc
as of last week.
Thanks!
I read it over but I still have some questions. I tried to buy
the book but I did not want to leave my credit card number
on the internet. I believe you were out of town last week.
Send me your phone number by private email
and I will buy a copy of your book.
I am in the Philippines, but you can contact my co-author George Wright
by email at grite@earthlink.net, and arrange a phone call or fax. He's
in southern California.
Are you familiar with Perry Mick's design?
See the drawing below. Perry-Mick-wb.jpg
I'm in touch with him, and have seen his Web site.
I noticed the duct converged which implies an increase
in the forward air velocity in the duct. His fan diameter
is 37.5 inches and his fan RPM is 6000 RPM. By my calculations
that will result in a tip velocity of about mach 0.97 at
200 MPH, S.L and 42 degrees F. Is that about right or am I doing
something wrong?
I'll run it and let you know, but it seems plausible a priori. Hmmm.
Funny he did that, if so, as the book does warn about that and gives a
procedure for checking it.
Is there some magic shape of duct and fan tip that we can
use to allow us to run the fan tips supersonic?
If there is, I don't know about it. There are of course compressor
designs for advanced gas turbines that can run locally supersonic, but
we're not playing in that league.
Could you use this information presented above to make a
plot of net thrust minus the drag of the duct as a function
of forward velocity given 180 engine HP at 6000 RPM?
For that, I would need to have my spreadsheet program working, and after
the last crash I discovered that my installation disks were corrupted.
Be happy to furnish you the spreadsheet file in Quattro pro format...
Marc
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org