Neil A. Kruiswyk wrote:
Yvon,
My first induction system,12 years ago, was based on the Rochester 2
barrel carb. I can tell you from experience that this carb is far too small
for a 13B. If the Holley is a direct replacement, it is probably too small
as well. The rotary wants BIG throats!! That's why the Weber and Del'Orto
48mm carbs were so popular. Today, fuel injection is the way to go but we
still need big throats to let the little beast breath.
Now I'm using the TMW 48mm throttle body (2 throats each 48mm in
diameter) (others have used 50 and 52mm) on the Racing Beat Delorto manifold
with 2 850cc injectors and the SDS fuel management system. www.sdsefi.com
If you want naturally aspirated power, this is one setup that will
deliver.
Neil
Nice job on the fuel injection plumbing Neil.
Neils-fuel-injection.jpg
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org