MAR34807@aol.com wrote:
Supposedly this person worked in Mobil 1 labs, anyone care to comment?
<< Subject: Re: Rotaries 'n Synthetics
From: Ritenour@LANexperts.com
Date: Sat, 29 May 1999 03:42:38 GMT
snips
Almost all commercially available 2 and 4 stroke synth oils burn far
far cleaner than conventional 2 and 4 stroke oils.
snips
All you need is a heat source, oil, and a non reactive
container/surface to burn it on/in and compare deposits. Chemically
the 2 and 4 stroke oils are very similar. 2 stroke usually are a
lower viscosity with less branched chain polymers.
snips
Almost all modern
high performance 2 stroke oil is now snythetic stock based.
This is due to the superior burning / high temp
lubricating characteristics of synth stock oil. These superior high
temp lubricating characteristics allow for less zinc/ash (or none for
the better synth oils) to be added.which further improves lubricating
and cuts down on deposits .
snips
Why do they add zinc to your
conventional oils? Its because the stuff breaks down easier and the
zinc is the last ditch material before metal to metal contact is made.
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org