Subject: Rotaries 'n Synthetics-'Felix Miata's' response
From: Paul
Date: 5/30/1999, 9:43 PM
To: zz

MAR34807@aol.com wrote:

<< Subject:     Re: Rotaries 'n Synthetics
From:   Felix Miata <bogus.due2UCE@gate.net>
Date:   Sat, 29 May 1999 01:02:15 -0400


And how does burning under atmospheric pressure relate to burning under
compression ratios in the 9 or 10 to 1 range? Even if it did, how's a
non-chemist going to know about anything he sees besides soot?

the 2 and 4 stroke oils are very similar.  2 stroke usually are  a
lower viscosity with less branched chain polymers.  




Different oils have different chemistries.
Mazda hasn't seen fit to recommend them for vehicles under warranty. No
one has proven that they do or do not affect oil seal o-rings any
differently than conventional oils, and o-ring life is the primary
determinant of smoking at high mileage. I know one popular brand that is
friendlier to o-rings than another very popular brand, and I'm sure
others vary too. It takes a long time and careful record keeping to
determine small differences, but with the large difference between the
two in particular, the difference will slap your face. All oils simply
are not alike, and the ones proven to work better are the ones to
recommend. So far, where's the proof in any synthetic's favor?


Felix Miata  ***  http://www.gate.net/~mrmazda  <- More than just a FAQ
 >>


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org