Klaus Savier came over and looked at my knock sensor on the rotor
housing. He warned about connecting a knock sensor to the
ignition system so that it retards the ignition automatically
when knock is detected. He contends the engine is most likely to
knock on takeoff and that is when you do not want to retard the
igniton as you would lose power.
The way my knock sensor is designed now is not possible to
use it to automatically retard the ignition.
It merely informs you when the engine is knocking. It should be used
when exploring the ignition timing/boost map in the development
stage. You can simulate takeoff conditions at a safe altitude
and a safe location so a forced landing is possible on an
airport in the event you need to drastically retard the ignition.
It is best used with Tracy's dual computer set up. When you
try a new ign/boost map and you get knock you can instantly revert
back to a much more conservative ign/boost map by throwing a switch.
It can also be used on a dyno of course.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org