Subject: Low cost knock sensors electronics.
From: Paul
Date: 5/31/1999, 10:14 PM
To: zz

Bill Freeman wrote:

Paul,

If you set up the system to only retard the ignition until you just pull
out of the knock range, seems perfect to me.  What bad things is
Klaus thinking of due to retarding the ignition on TO?  I know that
preignition will kill the engine, and retarded timing ( from "too far
advanced" to "normal", it seems to me) will cost a bit of power, but that
power wasn't "real" since it occurred when detonating.  Isn't
this the strategy of the old turbo Saabs - alowed you to use "any"
gas, just cost you some power if you used low octane, but no
problems.

Bill


OK I need to explain this more. In a piston engine for sure when knock
starts the ignition must be retarded way beyond the point where
knock  would normally start. You then creep back up once the combustion
chamber has cooled off a bit. This is called the hysteresis zone.

I am not sure this applies in a rotary.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org