Anderson Ed wrote:

Several have asked for diminsions of my 13B installation in an RV-6A.  I
took several measurements from the firewall skin.

Firewall Skin to front face of Ross Areo PSUR Propeller flange = 36 1/2"

Firewall Skin to flywheel-side face of rear side housing = 22 "

Ross PSRU measure 14 1/2" from Flywheel side face of rear side housing
to front face of propeller flange.  Taking 14 1/2 from 36 1/2 gives 22"
from FW to flywheel-side face of rear side housing = 22 " which checks
with measurement.

I measured 8" from FW Skin to aluminum boss on front cover for
distributor shaft.  Clearance from fire wall varies between 4 - 8 inches
depending on pulleys etc.

Ed Anderson
Rv-6A

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org