JMLBlues@aol.com wrote:
In my previous life as a heavy duty diesel engine engineer, we knew that hard
lines (oil, fuel injection, etc.) were prone to fatigue failure from
vibration if the lines were not properly supported. "Properly supported"
certainly understates what is required. It is critical that the supports be
placed such that the vibratory modes are not allowed to cause high
deflections at resonant conditions. A large diesel engine has lots of
excitation frequencies. I suspect that a large V-8 running at high speed also
can cause tremendous vibratory energy in the hard lines. I would think that
even well-made AN fittings could be subject to fatigue failure with bouncing
flexible lines. The stiffness of the fitting would concentrate all the stress
from the vibration.
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org