Subject: Europa fuel gauage....
From: Paul
Date: 6/2/1999, 7:43 PM
To: zz

bryan.wilkinson wrote:



(ii) The discussions on fuel measurment have raised many interesting
points, I would like to add a couple of ideas The currently available
capacitance fuel gauges require  a hole to be cut
in the top of tank, as a retro fit this is difficult and not everyone wants
to damage the integrity of the tank. Could the sender tube (I understand
they can be bent)  not be installed through the same point as the top vent
tube in the tank. By using a modified ali insert instead of F09B to hold
the sender and the top vent tube access, the sender could go down into the
starboard side of the tank using the port side as the reserve.

Been there, dun that. Too much hassle and resultant unreliability.

Jerry Davies, (Lyndhurst Touchdown Services) has developed a better system,
IMHO; the trouple with capacitance measurement is it never reads the same
twice, the dielectric constant of the fuel varies too much. Jerry uses a
magnetic float and a series of reed switches, so the reading is stepped, (8
or 10 steps) and therefore consistent. The switches are not submerged in
fuel, so safe.

Graham


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org