Subject: Europa_Mail: Fuel measurement/endurance (fwd)
From: Paul
Date: 6/2/1999, 4:31 PM
To: zz

bryan.wilkinson wrote:


Why is it so difficult to measure fuel level accurately ?

I'd be really interested in hearing from anyone who has come up with a
consistent fuel level measuring device.

Anything which is reliable, reasonably cheap, and easy to retro-fit into
the aircraft tank would be worth considering ?

I can work out useage per hour/fuel flow (approximate) and subtract this
from total capacity,
but it's not the way I'd want to contemplate any long cross country's
which are pushing the aircraft's maximum endurance.

I know FX will fly at a respectable cruise (5000 rpm) for just under 4
1/2 hours on my
_larger than average_  main tank, (with a few litres spare + 3 litres
unuseable),  but it's hardly the way to do business.

I was shocked to find that my recently installed visible sight gauge is
wildly inaccurate, yet is fitted conventionally.

On a recent flight I had at least 65 litres on board, and the gauge
showed zero - yes zero, for a large part of the flight 
(over an hour).......why ?..

And you did not land ????  You must be joking.


I suspect some kind of pressure wave, or partial vacuum may be
responsible, but if anyone has had a similar experience, I'd welcome 
advice on a solution ?

Alan


You need to find out before you fly that thing again.
See the ACRE NL  web site for a low pressure manometer tool used
for trouble shooting low pressure air problems.

Also see the message I just uploaded on the stand pipe fuel gage.
 
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org