Brian D. Cain wrote:
As some of you know, I'm one of the few strictly-automotive fellows
that's here on the list to learn a thing or two from the aircraft type.
One of the things I've finally decided to do, per what I've read on this
list, is remove the existing factory oil metering system to a 2-cycle
oil/fuel premix. I will be pulling the engine in a few weeks to do a
turbocharger change (and replace a throwout bearing because I'm an idiot
for not doing it a few months ago) and have decided to take that
opportun [NS line chop. Keep those lines less than 70 char guys]
I need, however, a list of parts and tools needed to do the job
correctly the first time. I'm figuring I will need to reconcile these
things:
- Removal of the oil metering pump and blocking off the outlet (somehow) on the front cover
- Removal of the (4) oil injectors from their respective locations
- Removal of the (4) oil metering lines
- Removal of the vacuum-actuated splitter (actually a custom-built one I made)
I see the first of the four being the most difficult. My biggest
concern is whether or not I need to remove the front cover to do some
special voodoo to it. I'd like to know ahead of time so I'll have the
proper gaskets and tools; especially to remove the front crank bolt,
etc.
Thanks for any tips.
B
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org