Subject: Air cooled Savauro Rotary
From: Paul
Date: 6/3/1999, 7:57 AM
To: zz

Richard Sohn wrote:

Hi Walter, I am not very familiar with the OMCs. My engine is a
Savauro. following is all the information I have on the engine.

The Savauro engine was builtd in Israel initially for use in
generators.

It was rated at 17hp @ 3000RPM. It was also available as an engine for
recreational vehicles with 30hp @ 5500RPM. Displacement is 440cc.
The  design  consists of a CI [cast iron?] rotor, AL housing with steel liner,


SH [side housing?] AL with no visible surface treatment. 
Aircooled with a blower, fixed CDI ignition
timing at 20deg. 
It has single side intake side port and single plug. Weight
is app. 60lb with recoil start. I will keep you updated as soon 
as I get it running. Richard  (repeat from March 21)

I got the engine disasembled with plenty of spare parts. I took the
oil injection pump off to run 2 stroke oil in gas. The porting of the
presently used housing should give me appr. 60hp/6500rpm with a
potential for 85hp/7500rpm. I am going to use this engine in a
gyrocopter with ducted fan. The fan is running presently with a 440
Kawasaki 2stroke.
Richard


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org