Bob Darrah wrote:
Anderson Ed wrote:
Snip.
If anyone has a suggestion about how to vent the header tank for vapors
and not have the boost pump push fuel thru the vent, I would be
interested. But, so far have not had vapor build up problem since these
changes. I would most expect it on ground runup on a hot day so we will
see in August.
Ed Anderson
This doesn't meet your stated requirements, Ed, but the end results are the same.
Vent your header tank into your mains. The fuel pump will still pump fuel
through the vent, but you still contain the fuel.
Bob Darrah
We are going to add "Don't put your header tank on the outside of
the firwall" to our list of fuel systems do's and don'ts.
Also if you are running a high pressure EFI system "Use a large
header tank or route the return supply to the main tanks"
"Use a vented header tank and don't push fuel through it."
"Immerse the high pressure pumps in the header tank if possible."
"Run only one pump at a time"
Do I hear any others?
Paul
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org