Subject: Banjo to AN -10 oil hose fitting.
From: Paul
Date: 6/5/1999, 8:14 AM
To: zz

JMLBlues@aol.com wrote:

The -8 fittings in the subject post are also straight out fittings, whereas
Ed wished to keep a very low profile on the oil inlet by using a 90 degree
fitting. All the 90's are more expensive than the straights in comparable
sizes, and the -10 90 is significantly more expensive than the -8.

Jon Lauter
Rotary Power Marine Corporation


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org