Russell Kent wrote:
We are going to add "Don't put your header tank on the outside of
the firwall" to our list of fuel systems do's and don'ts.
Also if you are running a high pressure EFI system "Use a large
header tank or route the return supply to the main tanks"
"Use a vented header tank and don't push fuel through it."
Just to avoid misplaced antecedent confusion, say "...and don't push fuel through the
vent."
And unless the vent is actually vented to the main(s). But if you vent to the mains,
why not simply plumb the return to the mains? Because if you plumb the return to the
mains, you have to worry about maintaining trim balance (presuming you have more than
one main), but if you vent to the mains, you aren't (or at least shouldn't be)
regularly pumping fuel back to the mains.
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org