Bill Freeman wrote:
SNIP
If anyone has a suggestion about how to vent the header tank for vapors
and not have the boost pump push fuel thru the vent, I would be
interested. But, so far have not had vapor build up problem since these
changes. I would most expect it on ground runup on a hot day so we will
see in August.
Ed Anderson
Ed,
Can't you just run it back into the main tank? If the vent is significantly
smaller than the tank-to-header line (like 1/4" vent and 3/8" fuel line (typical)
the bleed may be OK and keep your header both vented and cooled.
When Cessna had some troubles years ago with their P or T210, seems like they
finally wound up building a complete wing/cabin/engine mockup with clear fuel
lines to find out that they had significant boiling in the lines and much
counterflow
of bubbles back to the tanks, eventually enough bubbles would reduce the fuel
flow too much. They increased the fuel line size and the bubbles can now flow
uphill back to the tank and still get adequate liquid to the engine.
Bill
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org