Subject: KIS TR-4 cooling arrangement.
From: Paul
Date: 6/6/1999, 7:26 AM
To: zz

Vance and Emily Jaqua wrote:


On Fri, 04 Jun 1999 14:05:27   Paul wrote:


What did you think of my suggestions to remove the bulkhead
behind the front seats on the TR-4 and use the
center consol to take some of the fuse bending load
instead? I and some others want to put in car seats.

The side stiffness can be provided by building a
cantilever beam up the sides and leave enough room
to get creative with the seats - I tried to get
Bill to put in adjustible seats. The center console
could certainly made structural, but it would
complicate the assembly and rigging of those
controls routed inside it.


Vance since I am thinking of building or buying a KIS TR-4
and installing adjustable reclining seats
do you have a sketch of that "cantilever beam up the sides"?

I will need to remove the vertical panel that is part
of the existing bulkhead.

Also do you think 6 G's is too much to static test the rotary
engine motor mount on a KIS TR-4 given the sketch below?

statst.gif

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

statst.gif