George A. Graham wrote:
Hello Paul,
I've finally upgraded my computer and checked out your website,
very nice work. I'd like to try joining your mail list again, although
I do hope that you don't send large files in the mail (I can download
them).
I received a verbal report from a gear design engineer, who has been
evaluating the Mazda transmission gearset. He reports that 180 hp would
be the recommended upper limit for continuous duty. BTW, there are three
teeth engaged at all times in the helical gearset. Hopefully, a text
report will follow.
Yours truly,
George Graham
RX-7 Powered Graham-EZ, N4449E
Homepage <http://freenet.buffalo.edu/~ca266>
Good news George. If the temps are still running high a cooler would
help of course. I assume the back lash is holding constant.
I assume you have flown down to VA and picked up your airplane. Flown
anywhere interesting recently? There is a flyin next weekend in Butler
MO
if you want to give it a try. I will be giving four talks on the rotary.
I try to limit the downloads to 100K or so. In any event you can delete
them to save disk space. If you later find that you wanted the file
after all you can always ask me to upload it again. Some times the
messages
run to 50 a day or more. When that happens I try to dribble them out
over the weekend when not so many subscribers are on the internet.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org