Subject: Grooved rotor housings.
From: Paul
Date: 6/7/1999, 9:53 PM
To: zz

JMLBlues@aol.com wrote:

Enlarging the water jacket in the high heat flux zone (around the spark
plugs) will be counterproductive. Heat transfer is a function (don't remember
the exponent) of coolant velocity. A larger cross sectional area will reduce
the velocity. You basically want to have the coolant velocity as high as
possible without suffering cavitation erosion, a practical limit we used was
around 12 fps.

Jon Lauter
Rotary Power Marine Corporation

Given this if the stock water pump is good to 7000 or 7500 it might be a
good idea
to speed it up with a smaller pulley if you are going to use a 2:17 PSRU
and a max RPM of 6300 or so.

Paul Lamar

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org