Subject: List of do's and don'ts on fuel systems.
From: Paul
Date: 6/7/1999, 9:54 PM
To: zz

Paul Yaw wrote:

Paul wrote:


Along the lines of the ss-braided lines and the AN fittings and what
Not, this is something I would like to do to my particular setup.
Are any of you guys still using the factory Mazda metal fuel rails
With the factory 4x480/4x550cc/min injector setups?  If so, are the
Factory Mazda fuel rails a standard thread pitch?  I recall someone saying
On one of the Rx7 lists that they weren't.

Thanks for the help.

B

Brian, on the 20B, I've modified the fuel rails, but still using the 5/16" push
on hose filttings that are stock. I converted the hose from 5/16" to 3/8". I'm
using a high pressure gasoline type hose with fire resistant covering (Earl's)
throughout the fuel system.
Chuck_Harbert@arkwright.com

The fuel rails on the two rotors are cast aluminum with a metric
parallel thread.  There is enough meat in the casting to drill and tap
to a 1/4" NPT.  Do not overtighten the fittings or the tapered thread
could crack the casting.

PY

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org