Anderson Ed wrote:

Perhaps not surprising, I agree with Neil. There is no question that I
did overheat my engine which undoubtedly contributed or was the main
cause of my problem.  However, simply because I initially had a problem
and compounded it by my not being as quick to recognize the problem and
easy solution as I should have been and given there are a number of
"Plugs Up" engines flying witout problems shows that it is a viable
alternative if not necessarily the ideal.

I disagree I don't think it is a viable alternative.

Given, that the "Plugs Up" installation works, I am at a loss to your
apparently strong objections. However, having said that, you are
certainly entitled to your viewpoint as is everyone on the list.  The
only thing I object to is the your unilaterial decision to remove "Plugs
Up" material from the URL.  But, then again your are the host and it is
your URL.

Ed Anderson

How many are flying? Yours is not. As far as I know the other two
plugs up engines are down for one reason or another. On the other hand
Tracy 
is flying. Brice Danay is flying. George Graham is flying. Yvon is
flying.
Dave Atkins is flying. Probably several other up-right rotary engines
are flying that I don't know about. Enumerable upright rotary engines
gyros are flying as well.

Paul Lamar
 

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org