Subject: The E-shaft oil jet modification 'thing'
From: Paul
Date: 6/7/1999, 12:35 AM
To: zz

Turrbie@aol.com wrote:

In a message dated 6/6/99 10:31:03 PM Eastern Daylight Time,
rotaryeng@earthlink.net writes:

This idle pressure is a hair bit low.  Apparently the modification to the
 > >> e-shaft increases oil dumping quite a bit and, on the factory
regulator,

 > a
 > >> significant drop in pressure in the mid 1000rpms range.  I have to
keep
 > an
 > >> idle of ~1100rpm to sustain around 20psi - and this is in moderate,
 > ambient
 > >> temps notwithstanding hot, Texas summer days.
 > >>
 > >> Just wanted to let you guys know who are thinking about this.
 > >>
 > >> B

Are you running clearance factory race bearings? I have the Weber jets in an
87 6 port. Granted, the stock pressure gauge isn't terribly accurate. I'm
seeing something between 18 and 22 psi at 750 rpm. 14psi is the published
minimum oil pressure at idle. What weight oil are you running?
Bruce Turrentine


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org