Subject: Grooves in rotor housing water jackets.
From: Paul
Date: 6/8/1999, 9:04 PM
To: zz

Paul wrote:
Mainly to relieve the compressive stress due to thermal expansion.

Paul

Alfonso Lebron wrote:

Any data or hard reference supporting this?

Alfonso Lebron



I can probably dig up a bunch of shrunken rotor housings.

The principle is:
If you have a column and there is a slot in the side of the
column it can't very well expand and support any additional 
weight.

ASCII ART:

        O ring side
            \/
        ________
        ||      |
        ||      |      Aluminum   
steel   ||  ____|      Side
side    || |____  slot
Combust ||      |       water
chamber ||______|        side
       ///////////

If you heat this the aluminum will expand but it will
not yeild and permanently compress itself against a steel bolt.

When it cools off it will go back to its orginal dimensions
more or less. The o ring should have the same clearance to
work with more or less.

Without the slot the aluminum side would take a permanent
shrunken set and the O ring would leak.


Just something I invented. I probably should apply for a patent
and make Mazda pay me a nickel on every new rotary engine sold
with this feature.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org