Subject: Picture of Grooves in rotor housing water jackets.
From: Paul
Date: 6/8/1999, 3:57 PM
To: zz

Brian D. Cain wrote:


Excellent picture.  So, the idea to 'groove' the surfaces of those
particular jackets rather than do the brute force 'bigger is better'
thing by making the passages larger... which wouldn't do much else
unless the rest of the system isn't an hourglass shape...


I don't understand the principle behind the grooved over flat surface
thing.

B


Paul wrote:
The short answer Brian is; it improves the heat transfer compared
to the bigger is better approach. Trust me :-)

For your application I don't think you will notice the difference.
Not unless you blast across West Texas flat out for hours on
end that is :-)

Paul

 Alfonso Lebron wrote:

The principle behind the grooved over flat surface is based on the
increase of surface area in contact with the coolant. This way, more
coolant is exposed to the combustion chamber external surfaces thus
allowing more heat transfer, I think. Same principle applies whenever
there is transfer across a barrier, be it heat exchange, filtration....
Have you noticed how grooved are most of the air filters?

Alfonso Lebron


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org