Perry Mick wrote:
Paul wrote:
This is Perry's six bladed version. The new one has only three
blades.
Perry, what is the clearance between tip and duct and how
do you keep that clearance constant? Is the engine ridgidly
mounted?
Actually in that picture you sent with this message, you see
more stator blades than propeller blades. The six blade
propeller is painted red, orange, and yellow. The stators
in that photo are unpainted fiberglass and filler.
My new duct has no stators (yet). Tip clearance is about
1/8 inch. The engine is rigidly mounted, and the duct is
rigidly mounted to the engine with welded steel tubing in
the two wing roots, mounts to the engine at the transmission
mounting points. Also a third welded tube going straight up
to the top of the duct. All three have braces going forward
to the front of the engine or engine mount.
The engine wouldn't have to be rigidly mounted to the airframe,
but the duct does have to be rigidly mounted to the engine.
I'm counting on smooth rotary operation, so far seems to be
ok. May try to work in some shock mounts at some point.
--
Perry Mick
Duckt N7XR
http://www.mickaircraft.com/duckt.htm
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org