Subject: Slips and Fuel pumps running dry.
From: Paul
Date: 6/17/1999, 1:07 PM
To: zz

Jeff Spitzer wrote:

At 05:34 AM 6/16/99 -0700, you wrote:
Bob Darrah wrote:

I've picked up a lot of good info from you guys so far, now for two
more questions:

 Unporting a fuel pump momentarily in a slip is not one of my greatest
concerns, IF the fuel pump will expel the air and pick up fuel when
the port is again covered with fuel.  Has anyone checked to see
how these pumps will handle a momentary air bubble?

In addition, does anyone know what happens if  a fuel flow cooled
pump is accidently let run dry?  I can get all sorts of bad vibes on that
one, but has anyone had any experience with this?

What kind of pumps have threaded fittings on both ends?

Inquiring minds want to know!

Bob Darrah


The pumps have no problem with an air "bubble".  What the rest of the
system does with it is another story.  If the (internally fuel cooled) pump
is left to run dry it will burn itself up quite quickly.

Jeff Spitzer

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org