Perry Mick wrote:
Paul:
Got some new photos on the webpage. Bill Freeman suggested I put
in thumbnails, but I haven't taken the time to do that yet. Instead
I put the photos on several pages. Some pages will still take awhile
to download, sorry guys.
Comments and safety concerns welcome. I'll be flying this thing in
a month or two.
--
Perry J. Mick
Mick Duckt N7XR
http://www.mickaircraft.com/duckt.htm
Looking at the fan blade profile at the tips you will definetly
pick up some thrust, RPM and HP by thinning them down.
Start with sanding off the glass on the bottom and adding
several layers of carbon at a 30 degree angle. When that cures
sand off the top down to the new carbon and add several more layers of
carbon at a 30 degree. Shoot for a 6% section thickness.
Another suggestion is spray the inside of the duct with self
rising foam where the fan rotates. Reinstall the fan and start it
up. It should machine its own path in the foam. Streamline the
foam and cover with a light layer of 4 oz glass. That should get the
clearance down to zilch :-)
Send me higher res picture Perry so I can get a better look at
at the plumbing and wiring details. I won't mind the download
time.
BTW I am thinking of going to Jackpot on July 4th as I think
the local experimental races will be held there. I could
buzz over to your place and have a look.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org