Subject: Perry Mick 13B ducted fan EZ
From: Paul
Date: 6/18/1999, 9:53 AM
To: zz

Perry Mick wrote:

Paul wrote:


In this photo it is evident that you are losing thrust due
to the low pressure area in front of the duct acting on the
downsloping top of the cowling. I new intake manifold is
called for to reduce the big hump in the cowling.
You might want to take some pressure measurements on this
area of the cowling to confirm this.

Actually I thought my bumps were pretty small, have you seen
the bumps on a Lyc Long-Ez, they're huge.  Of course they
have a much longer prop swinging well outside the radius
of those big bumps.

The reason I went mostly stock engine, is because it works.
Wanted to start with something that works, then make
incremental improvements.

The duct is definetly biased toward low speed thrust IMHO.

Flight tests will tell us that.  But hopefully the low speed
thrust will get me in the air.  Perhaps the early flights
with this duct will prove to be speed limited.  When we get the data,
it may point towards improvements that could be made to get more
speed, which means building another duct.  I'm prepared to do
that, they're not hard to build out of composites.

Perry


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org