Perry Mick wrote:
Paul wrote:
Another suggestion is spray the inside of the duct with self
rising foam where the fan rotates. Reinstall the fan and start it
up. It should machine its own path in the foam. Streamline the
foam and cover with a light layer of 4 oz glass. That should get the
clearance down to zilch :-)
I was thinking of doing this with West System micro, that stuff is
really easy to sand, let the prop do the sanding. Then I would
just leave it at that, no additional glass. That way in case of
sudden loads or vibration, the prop would just take off more micro,
not do any damage.
Perry
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org