MAR34807@aol.com wrote:

In a message dated 6/17/99 8:05:59 PM Central Daylight Time,
rotaryeng@earthlink.net writes:

<< Bob Darrah wrote:
 >

 > >> MAR34807 wrote:
 > >> Mario, in stock form from the factory in the car the 20B is rated to
give 299
 > >> hp at 4000 rpm (turbo model). In stock auto form it has a 7000 rpm
redline,
 > >> the hp dropping off a little (not much) at 6000 rpm.
 > Snip
 >
 >  I have been looking for this kind of info on the 20B for some time,
 > where should I be looking?  What power at what RPM with what boost can one
 > expect from this engine?  From your above figures, I may want to change the
 > PSRU ratio.  299hp at 4000 rpm sounds to good to be true.
 >
 > Bob Darrah >>

www.3rotor.com in the links on Pauls webpage!!!!
Admitedly this information is nontechnical as we do not know the boost that
the hp is quoted at. But it would be the same as the 13Bttrew which is about
9 or so psi  [overboost] at sea level, if I am not mistaken. Most of this
information comes directly from sales brochures in Japan when the car was
made. There are also other 3rotor web pages. Car was sold a lot in New
Zealand and Australia as well. Most of the information is from New Zealand.
(Japanese don't seem to want to disseminate old outmoded information on a
product they no longer make)
An after-market non-sequential turbocharger, no exhaust, etc, might make
more.
Bob, you may want to contact me directly.

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org