Subject: Perry Mick 13B ducted fan EZ
From: Paul
Date: 6/22/1999, 1:49 AM
To: zz

F. Marc de Piolenc wrote:

Paul wrote:

Normally I am no a fan of Barney Wainfin's articles
but his recent tome on ducted props was pretty good.
the configurationyou have would seem to favor static
thrust - but you have a hopefully fast airplane.
Expanding sub sonic flow behind the prop as suggested by
Marc cannot possibly be the right thing
to do. You would be reducing exit velocity from
the vehicle and thrust was still M dot delta V the
last time I looked - Vance

M dot delta V ignors the increment of drag due to the duct
that hopefully is increasing M dot delta V.

Let me re-word "M dot delta V" slightly
and correct me if I am wrong: air mass times
the change in velocity equals thrust. I am a little rusty
on my calculas.

It doesn't take calculus - the formulas are already derived. The
discussion above ignores the effect of velocity change on power
required, and considers only momentum change. This is the source of most
errors in ducted fan design. Considering only momentum, as most builders
do, the exit tract is squeezed down to get the highest possible exit
velocity, and the result is a very high power requirement. The chapter
on Propulsion Physics and the description of the Davis "cold jet"
project in our book are both instructive.

Marc de Piolenc
http://www89.pair.com/techinfo/MassFlow/massflow.htm


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org