The engine is running in this picture. The black anodised,
finely machined, fan shaft extension can be seen. The device
on the lower part of the picture is the outlet duct for
the stock Mazda RX7 oil cooler. The air for the oil
cooler comes up from an arm pit scoop, turns 90 degrees
to go through the cooler and then 90 degrees again to
exit at the trialing edge slot.
The stock intake manifold is also visable of course.
The duct and engine are ridgidly mounted to the airframe
with a steel tube space frame.
There is some high frequency vibration that can be felt in
the cockpit area. It would be better to shock mount the engine
and the duct ridgidly mounted together.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org