MAR34807@aol.com wrote:
In a message dated 6/17/99 4:20:19 PM Central Daylight Time,
rotaryeng@earthlink.net writes:
<< Jeff Spitzer wrote:
>
> At 05:34 AM 6/16/99 -0700, you wrote:
> >Bob Darrah wrote:
> >>
> >> I've picked up a lot of good info from you guys so far, now for two
> >> more questions:
> >>
> >> Unporting a fuel pump momentarily in a slip is not one of my greatest
> >> concerns, IF the fuel pump will expel the air and pick up fuel when
> >> the port is again covered with fuel. Has anyone checked to see
> >> how these pumps will handle a momentary air bubble?
> >>
> >> In addition, does anyone know what happens if a fuel flow cooled
> >> pump is accidently let run dry? I can get all sorts of bad vibes on
that
> >> one, but has anyone had any experience with this?
> >>
> >> What kind of pumps have threaded fittings on both ends?
> >>
> >> Inquiring minds want to know!
> >>
> >> Bob Darrah
> >
> The pumps have no problem with an air "bubble". What the rest of the
> system does with it is another story. If the (internally fuel cooled) pump
> is left to run dry it will burn itself up quite quickly.
>
> Jeff Spitzer
>>
Supposedly in racing this is a problem on turns and I have heard the racers
don't let the fuel get down too low just because of this "leaning out
condition". If you look in an rx7 tank where the pump is, it has a baffle
around the pickup to hold gas there, I suppose just for this reason. On
prolonged turns, lack of gas being picked up supposedly leans out the engines
which are operating under boost and that kills the horses when it detonates
the apex seals.
You could test this with a stock tank you tilt when the engine is running and
a fuel pressure gauge (which I plan to do) on a test stand. In any case I am
planning on having 2 20B fuel pumps (with warning lights) that will be in the
tanks on opposite wings-no problem.
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org