Subject: Perry Mick 13B ducted fan EZ
From: Paul
Date: 6/23/1999, 12:45 AM
To: zz

Vance and Emily Jaqua wrote:


Jeff Spitzer wrote:

There is then a static pressure rise across the fan and proper acceleration
downstream.  Again, IIRC, this is the proper setup for high speed flight.
The ideal scenario for both static and high speed includes variable pitch,
variable exit, and least important, variable lip.  BTW, Vance, expanding
subsonic flow speeds it up not slows it down.

Jeff Spitzer

Jeff - sorry for the sloppy terminology - increasing
area on subsonic flow does indeed increase static
pressure and the air is thus not expanding altho
the area is - reduced exit flow velocity at the same
mass flow will be a thrust reduction. Supersonic
nozzles do expand in pressure and velocity if
sufficient pressure ratio exists - if not it will
shock down to subsonic and drag your tail something
fierce. Converging nozzles behind a low pressure
fan could increase the velocity but will also
back pressure the fan - unless you are willing
to pay a price to make it look like a jet - you
are probably better off leaving the duct in the
garage - Vance

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org