Subject: Perry Mick 13B ducted fan EZ
From: Paul
Date: 6/23/1999, 9:09 PM
To: zz

Perry Mick wrote:

Paul wrote:

And here we have another challenge for the successful integration of a
ducted fan.


Sounds like you've had some "hands on" experiences with these things.
Can you tell us more about what you did, problems you had.

Does not sound like we are going to be able to talk Perry out of this.
This man displays the admirable quality of perseverance!!!


If the Wrights had listened to the conventional wisdom in 1903,
we still may not be flying.  There are countless examples of this.
Maybe it's called intellectual arrogance.

Not enough experimentation has been done with these things in
General Aviation.  The RC modelers are more advanced in this area
than GA.  It's my belief the FAA kills innovation in GA with
excessive, outdated regulation.  It's up to the homebuilt
community to get some progress, and the homebuilt movement has
provided some great advances to GA over the last 20 years, stimulated
by Burt Rutan in 1975, IMHO.

I don't expect it to perform as well as a normal low rpm prop,
but I'm willing to sacrifice 5-10% in speed, to get a simpler,
more reliable airplane.  With more power, I bet it could be just
as fast, with the only tradeoff being more fuel consumption
than the norm, another price I'm willing to pay.  In other words,
if you look at it from a miles per gallon or efficiency standpoint,
it will never be better.  Knew that before I started.

Perry

I think we need to focus on getting it flying safely. The data derived
from
that will determine if Perry's hopes and expectations are realized.
I also think a flight test will reveal whether it is worth while 
or even possible to make improvements that will realize those
expectations.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org