I was driving home from the hangar thinking about aircraft
engines after taking two perfectly good cylinders off my
brand new O-470 so the Continental rep could check the
brand new crank for cracks tomorrow as per an AD.
It struck me that aircraft engines are so finely engineered
and developed that the least little defect or improper
assembly technique can cause them to fail. This is an
out grouth of their exceptional power to weight ratio
for such a heavy duty piston engine.
Other heavy duty engines such as found in tractor trailer
trucks are much heavier and probably more tolerant of
small manufacturing defects. These engines weigh
around 2000 pounds and put out only 250 HP or so.
This is what makes the rotary so remarkable. It is possible
to quadruple the stock HP of a rotary by pumping it up with
a turbo charger and still not have it blow up.
You could never take a 180 HP aircraft piston engine and
pump it up to 730 HP. It would blow up long before you got
anywhere near 730 HP.
The rotary has a huge margin of reserve strength for
such a high power to weight ratio engine to begin with.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org