Jeff Spitzer wrote:
F. Marc de Piolenc wrote:
Jeff Spitzer wrote:
The efficiency of a ducted fan is HIGHLY
dependent on uniform inflow.
Experiment shows lightly loaded fans (the right kind for good
propulsive efficiency) are highly INsensitive to both radial and
tangential non-uniformities. One of my main reasons for pursuing these
things.
Sorry, but I was referring to AXIAL non-uniformities. Those are the killers!
Higher pressure ratios result in higher velocity ratios, resulting in
LOWER propulsive efficiency.
Theoretical propulsive efficiency is strictly based on mass flow. Just
because the air has higher axial velocity at the fan disk does not
necessarily mean lower propulsive efficiency.
Jeff Spitzer
I think what Marc is trying to say here is; It is better to have
a larger mass of air moving only slightly faster than forward velocity
rather than a smaller mass of air moving much faster than
forward velocity. The former is more efficient.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org