JMLBlues@aol.com wrote:
The reason "performance" engines are rated using the old correction factors
is simply that it gives a much higher figure. The old standard corrected to
60 F air temp and ZERO relative humidity. I guess if everybody uses that std,
you still have a basis for comparison. But when you take a manufacturer's
rating (corrected to 77 F and about 30% relative humidity) and then do some
magic mojo to the engine, run it for an instant on the dyno using the old
correction factors, its easy to make a claim for improved engine performance
that does not really reflect the same reality.
What pecentage difference are we talking about here?
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org