JMLBlues@aol.com wrote:
Paul,
snip
Having also worked on the 2000 lb variety of piston engines (at Cummins, as
an engineer working on the 11 liter class eight truck engine), I can tell you
that they are designed to acheive remarkable efficiency (BSFC of 0.30!) and
often run 800,000 miles before an overhaul. We had some field test trucks
returning 8 mpg hauling 40,000 lbs loads. I have no aircraft engine
experience, but I would guess that it is not worth the substantial investment
to make a newly optimized aircraft piston engine due to the rather small
market. If such an effort were to be undertaken, I believe that power to
weight ratios approaching the stock 13B could be acheived, with good
reliability. We should also recognize that as good as the 13B is, it is not a
weight optimized engine -- iron end housings could easily be aluminum, the
crank is too heavy, and with very serious effort lighter rotors could be
made. The target for a modern rotary should be better than 1lb / hp, not
close to 2 lb / hp.
Respectfully yours,
Jonathan Lauter
I agree on the rotary. One and a half pounds per HP is fine with me if
it
is bullet proof. Aluminum end housings and lighter rotors may be
less durable.
I think it is probably rather eazy to design and manufacture an engine
that will go 800,000 miles in heavy duty use if it weighs eight pounds
per HP. What impresses me is a heavy duty engine that weighs only
1.75 pound per HP like an air cooled aircraft piston engine.
When hauling a load in your airplane and climbing over these 12,000 foot
mountains we have out here you want something that is not going to
break.
There is no place to land.
If you are driving a truck you can always pull over and park.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org