JMLBlues@aol.com wrote:
I agree with Paul on the detonation concern. 11 psi is a lot of boost, it
will require retarded timing and a cool day to keep it from detonating. At
that pressure, a little detonation can destroy the engine rather quickly.
Our supercharged marine engine runs quite a bit less boost -- in fact, we
found that with the supercharger you can get to the point of diminishing
returns easily. Running the blower at 11 psi takes much more power than say 7
or 8 psi, the charge temperature is much hotter, and consequently timing
needs to be retarded. Add it all up, and the power is not much better than
for lower boost. If low end torque is the goal, the higher boost is good, but
I'd limit RPM to well below 6000.
Jonathan Lauter
Rotary Power Marine Corporation
BTW Tom what is your intake manifold temperature after the intercooler
at 11 psi boost?
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org