JMLBlues@aol.com wrote:
Early in our supercharged testing, while running high boost, we cracked a
flywheel end housing at the dowel near the oil filter base. I don't recall if
the engine stopped. It would run, but with a very, very bad oil leak as the
crack went into the pressurized oil transfer passage. This was an early
vintage four port engine. Later engines have beefier bosses around the dowel.
We did not break an apex seal.
Yes I have heard of this before. Apparently there is a stress
concentration
there. Good thing to keep an eye on Tom. Thanks Jon.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org