Perry Mick wrote:
Paul wrote:
Perry is currently running about a
twelve inch long e-shaft extension.
Pretty good guess Paul. Actually, the "prop adaptor" is two inches
thick, and the prop extension is 8 inches. Added length is 10 inches
aft of the flywheel. I think Ed Anderson measured 14.5 inches from
the rear transmission mounting flange on the engine to the front of
the prop hub in his Ross. (front and rear as in a pusher).
Mine measures 12.0 inches from the transmission flange to the prop
hub. This extension is mainly required to allow the prop to clear
the stock-mounted starter. But it also gives me 12 inches+ to fair
those big bumps into the prop hub.
Perry
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org