Subject: Tom Jordans supercharged 13B
From: Paul
Date: 6/27/1999, 1:28 PM
To: zz

Paul Yaw wrote:

Paul wrote:

TOM & BOBBIE JORDAN wrote:

Archie:  The supercharger is off the shelf Eaton.  No modifications have
been done.  I can find out the displacement---don't know.
Overdriven?-----The pulley on the crankshaft is approximately 4" and the
pulley on the eaton is approx 2".  I will get more information tomorrow and
will pass along the info.   Tom

Paul wrote:

Tom,

Here is the Eaton supercharger website.  Most of what you need to know
should be available here.  Are you running mogas or 100LL?  What is your
horsepower target, and at what rpm?  Do you have the ability to control
timing based on boost pressure?  What is your exhaust system
configuration?  Injector size?  Fuel pressure?

Paul Yaw

 http://www.eaton.com/supercharger/index.html#models

I never realised that the Eaton is not a true rootes
blower untill I looked at their web site.

It is kind of a cross between a rootes and a Lysholm.

No wonder it was picked by MB over the Wankel version
of the rootes. It is probably more efficient than any
pure rootes blower.

As you can see from this chart the temperature of the air coming from 
the super charger is directly proportional to the boost.

The detonation tendencies of the engine is a strong function of
this temperature so I hope Tom's intercooler is
doing a good job of cooling off this air as he is runing 11
psi of boost at only 4400 RPM.

I'll say one thing however. Tom's airplane ought to 
really jump off the ground during takeoff. :-)

Eaton-deltaT.gif
 
Paul Lamar

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Eaton-deltaT.gif