I pluged Vances thrust numbers into my simulation
and here is what I got. I think Vance's thrust
numbers are somewhat optimistic as the duct efficiency
is 97 percent at 400 MPH which is rather unlikely.
1000 HP is 550,000 pound ft/sec.
Dividing by 586.6 FPS or 400 MPH gives us
a max thrust of only 937.6 pounds with a 100%
efficient fan and duct.
Note: Vance stated the thrust numbers for 500 HP.
Since we have two 500 HP engines I doubled his thrust
numbers.
The acceleration is based on a gross weight of 4000 pounds.
This is with a flat plate of 2 while Vance's flate
plate was only 1.6 and his stated top speed was only
390 MPH as I recall. This is all at sea level of course.
I am using the same numbers for dynamic pressure (Q)
as Vance or about 416 psf at 400 MPH.
Note also: There is a curious drop in thrust at 200 MPH.
Theoritical Vance's Duct
MPH Thrust Thrust Eff. Drag Acc.
25 15000 3
50 7500 1758 24 13 0.436
75 5000 29
100 3750 1598 43 52 0.386
125 3000 81
150 2500 117
175 2143 159
200 1875 692 36 208 0.121
225 1667 263
250 1500 325
275 1364 393
300 1250 838 67 468 0.092
325 1154 549
350 1071 637
375 1000 731
400 938 912 97 832 0.020
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org